Used Continuous Mixers & Blenders

Constructed from 304 stainless steel
Flanged U-trough design with approximtely 15 sq/ft area of dimple-plated jacket
Jacket rated for 150PSIG at 194°F
Design Metal Temperature: -20°F at 150PSIG
Product Discharge: 10" square flange
10HP inline gearmotor drive (inverter duty) with flex-couple. No VFD or speed controller included.
Supply: 230/460V, 60Hz, 3ph
Installed to a stainless steel base frame measuring 20"W X 126"L
Weight = 2,034 LBS
Agitator speed = 283 RPM.

All stainless steel construction.
Inlet: 11" X 31" elliptical sleeve
Drive End Discharge: 10"Ø sleeve
Idle End Discharge: 11" square
Trough Length: 104"
Hinged, bottom trough drop with clamps
1.5HP gearmotor drive
Supply Power: 208-230/460V, 60Hz, 3ph
Current auger speed: 136RPM
Overall dimensions: 139x16x19"
Weight = 560 LBS.

All carbon steel continuous mixer. Serial number: 42306-1883. Capacity: 11 cu ft working / 21.2 cu ft total / 159 gallons / 600 liters. Mixing chamber is 24"ø x 6'-6" long, with a total length of 10'-4". 10" x 14" flanged product inlet. Mounting brackets for four choppers. 1"npt steam injection ports. No motor.
Shipping dimensions: 130" long x 48" wide x 49" high.
Weight = 2,150 lbs.

SERIAL 13607
ORIGINALLY DESIGNED AS A MIXER TO MIX LIQUID GLUE WITH WOOD CHIPS.
304 STAINLESS STEEL TOP & BOTTOM SHELL, 120 GRIT FINISH ON INTERIOR.
CARBON STEEL SHAFT & AGITATOR BARS.
No drive included.
LITTLEFORD “LOSPI" WEAR EDGING ON FRONT SIDE OF TOOL SOCKETS ON MAIN SHAFT.
JACKET MAWP PSI 45 PSI; MAWT 100 F; MDMT -20F @ 45 PSI. DESIGNED FOR 35 GPM OF WATER AT 50°F
DRUM MAWP PSI ATMOSPHERIC; MAWT F 100; MDMT F -20 @ ATMOSPHERIC PRESSURE
ASME STAMPED; SN 4090R
15 ¾" x 19 ½" INLET W/ 20 ¼" x 24 ¼" FLANGE
15" x 13 ½" HINGED OUTLET
OVERALL DIMENSIONS ARE 151" LONG X 49" WIDE X 46" TALL.
INTERNAL VOLUME: APPROX 42 CUBIC FT, 1200 LITER
102" L x 30" DIAM
HAND ROTATES EASILY.

Serial No 43565-5932. Built in 2011.
304 Stainless Steel contact parts.
Overall shipping dimensions: 14'-1" L x 87" W x 52" H.
Shipping weight = 10,190 LBS.
No motor included.
Jacket Max allowable working pressure = 45 PSI @ 100°F.
Serial No of jacket (upper section) 13929 / (bottom section) 13930.
Mixer chamber is rated for atmospheric pressure only.
The internals have injection tubes installed but no mixing arm tooling is included. The rotating shaft is hollow for liquid injection and there are (10) additional injection manifold holes. Unit is unused, surplus.
Internal volume / processing capacity of approximately 42 cubic feet (equivalent to 1,200 liters)

24" W x 8' L x 2' Deep Mixing Chamber
(13) 22" L x 1.5" W Paddles
14" x 14" Access Panel
8" Outlet on driven end
5 HP Motor: 1745 RPM, 575 Volt
Full Cover included

Andritz Feed and Biofuel Screw Mixer, Model-DA30-21 Series 2 S/N- 132090174-2012
304 Stainless Steel material contact parts. 6 Additive Ports, Gear Box Assembly With FAZ 107 AD
30HP, 460 volt, 1765RPM, 3 phase, 60Hz with belt/gear drive.
Agitator speed = 150 RPM.
Dimensions: 3'-4" W x 4'-8" H x 28'-8" L
Shipping Weight: 12,500 lbs
Drawings on file
Applications: Corn Wet Milling, Bio Ethanol, Waste and By-Products and other
This versatile Double Agitator Mixer (or DA Mixer, also known as a pug mill) continuously mixes all types of products including dry materials, free-flowing powders, thin slurries, and thick pastes. The compact design of this DA Mixer allows installation in low-headroom areas. Mixing intensity, retention time, and product appearance can be controlled simply by changing the agitator speed or paddle settings
The DA Mixer is designed for both standard or corrosive/abrasive applications. It is supplied in a stainless steel construction and with bearings which are isolated from the product zone. Both of these features are designed to help preserve the integrity of your process blend/formulation as well as to extend the life of your machine. Typical uses for the DA Mixer are adding molasses or fat to animal feeds and water to meals and filter dusts; sewage sludge and lime/wood chips; corn gluten and steepwater; filter cake and dried, recycled fiber; explosive slurries; and human foods. Many DA Mixers, in non-abrasive applications, have been in operation for more than 30 years.

All mild steel construction.
Product Inlet: 24" X 15" flanged with removable panel
Product Discharge: 24" X 14" flanged with removable panel
55" vertical distance between inlet and discharge.
Ø4.5" drive shaft, pillow block end bearing supported (NO DRIVE AVAILABLE).
Overall dimensions: 157" L x 42" W x 50" H.
Weight = 4,851LBS
No drive.

All mild steel construction.
Product Inlet: 17.5" X 15" flanged with removable panel
Product Discharge: 24" X 13.5" flanged with removable panel
55" vertical distance between inlet and discharge.
Media Connections: 1"Ø ANSI 150 flanged
Ø4.5" drive shaft, pillow block end bearing supported.
Overall dimensions: 132" L x 38" W x 47" H
Weight = 3,939 LBS

Model DA21-6
For continuous, high intensity mixing, agglomerating, and conditioning.
Adjustable speed, retention time, and mixing intensity.
Mixing chamber is constructed with 3/16" stainless plate with a bottom-center ridge.
Agitators: 10.5"Ø heavy duty, helix-pitched adjustable paddles.
Drive end drop-out flanged discharge: 21" X 6".
5HP V-belt and shaft-mount gear reduction drive (230/460V, 60Hz, 3ph)
Max. Working Speed: 52.5RPM
Carbon steel base frame, 32"W X 112"L mounting area.