Used and Surplus Other Mixers & Blenders

MACHINE NUMBER 47720, ORDER NUMBER WO5722. S/N ARE 6D26. BAKER PERKINS INC., SAGINAW, MI.  F.W. EQUIPMENT, 24402.  DRIVE MOTOR IS RELIANCE 25 HP 880 RPM, 230/460, 3 PHASE, 60 HZ, 326T FRAME.  UNIT HAS AIR CYLINDER ACTUATED DUMP GATE MEASURING 20" X 14".  STAINLESS STEEL INTERIOR LINING OF SHELL AS WELL AS GATE FACE.  HOUSING OF THIS UNIT IS CAST IRON/CARBON STEEL.  MIXER IS JACKETED. 39" X 18" INLET OPENING. DIMENSIONS 92"H X 88"W X 77"D. MAINTENANCE & SERVICE MANUAL ON FILE. MANUAL & DRAWINGS ON FILE.

Enameled mild steel construction of the mixing chamber (3/16" plate steel)
Designed as a bottom product entry (6"Ø sleeve inlet), into a vertical conveying chamber installed with an 11"Ø internal auger that continually delivers product to the upper octagonal mixing chamber (23.5" inside). As product is conveyed and agitated upward filling the chamber, it is forced over a 17" wide adjustable weir gate discharge.
Bottom installed with 4" pneumatic slide gate to empty mixing chamber
4" square structural tube frame with a 33.5"W X 41"L footprint & 98" overall height
Top-mounted with a 33HP (25kW) motor, belt driven with guard
Supply power: 440V 60Hz

44 RPM output, right-angle geabox (NO DRIVE, SHAFT OR IMPELLER). Couples to a 1HP, 1800RPM motor with a 140TC bell housing motor adapter. Fitted with QED-D auxiliary stuffing box shaft seals.

Manufactured by Amandus Kahl Nachf, Hamburg, Germany. Continous reciprocating feeder. Serial number 16751; type m500. 316 stainless steel construction. Drive is eurodrive, 1740/118 rpm, 480 volt, 14.2 amps. Overall length is 157". Inlet is 19" diameter. Outlet is 20" diameter. Center of feed to center of discharge is 71". Center of pivot point to center of outlet is 69". Pivot shaft is 3" diameter x 28" long. Paddles are adjustable in pitch and inside diameter of mixing tube is 18". Demonstration video available.

20"Ø X 19" deep mixing bowl
1.5 HP Baldor Motor: 230/460 Volt, 1725 RPM, 3 Phase, Frame: 56C
Winsmith Reducer: 30:1 Ratio
Overall Dimensions: 38" L x 26" W x 34" H
Demonstration video on file.

20"Ø X 19" deep mixing bowl
1.5 HP Baldor Motor: 230/460 Volt, 1725 RPM, 3 Phase, Frame: 56C
Winsmith Reducer: 30:1 Ratio
Overall Dimensions: 38" L x 26" W x 34" H

STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 48" DIAMETER X 90" STRAIGHT SIDE WITH CONE BOTTOM THAT IS PERFORATED AND CONTAINS SCREENS. 12" DIAMETER INTERNAL VERTICAL SCREW. COMPLETE WITH 7.5 HP MOTOR AND GEAR REDUCER. VERY HEAVY DUTY CONSTRUCTION. UNITS HAVE BEEN TEST RUN.