Used Liquid Mixer Drives

For small batch open or closed lid mixing, 5 gallon pail or similar size.
Shaft Size: Ø1.0" with clamp coupling (mixer shaft and impeller not included)
Max. speed: 3,000RPM
Cylinder stroke: 24"
Mixer Height: 36" lowered, 60" raised
12" square pedestal base for bench top mounting, installed pail holder.
1.7HP Air-motor drive.

For small batch open or closed lid mixing, 5 gallon pail or similar size.
Shaft Size: Ø1.0" with clamp coupling (mixer shaft and impeller not included)
Max. speed: 3,000RPM
Cylinder stroke: 24" [Cylinder repair needed]
Mixer Height: 36" lowered, 60" raised
12" square pedestal base for bench top mounting, installed pail holder.
1.7HP Air-motor drive.

Serial No: A755751
Size 8065
Ratio: 298.235
Output RPM: 6.035
Cast iron housing, right angle shaft configuration with four gear stages.
10HP marine duty 460 volt motor, 1760RPM
Horsepower rated for 20.6HP
Keyed output shaft with flange adapter.

Serial No: A10655
For small batch open or closed lid mixing, 5 gallon pail or similar size.
Shaft Size: Ø1.0" with clamp coupling (mixer shaft and impeller not included)
Cylinder stroke: 24"
Mixer Height: 36" lowered, 60" raised
12" square pedestal base for bench top mounting, installed pail holder.
Powered by a 1.7HP reversable air motor, 3000RPM, v-belt drive.

For small batch open or closed lid mixing, 5 gallon pail or similar size.
Shaft Size: Ø1.0" with clamp coupling (mixer shaft and impeller not included)
Cylinder stroke: 24"
Mixer Height: 36" lowered, 60" raised
12" square pedestal base for bench top mounting, installed pail holder.
Powered by a 1.7HP reversable air motor, 3000RPM, v-belt drive.
Runs at 1,528RPM w/ 90PSI
*hand weight shown in photos not included.

Serial No: A10656
For small batch open or closed lid mixing, 5 gallon pail or similar size.
Shaft Size: Ø1.0" with clamp coupling (mixer shaft and impeller not included)
Max. speed: 3,000RPM
Cylinder stroke: 24"
Mixer Height: 36" lowered, 60" raised
12" square pedestal base for bench top mounting, installed pail holder.
1.7HP Air-motor drive (rebuild is recommended).

Serial No: 70980-5
Heavy-duty mixer with C-face direct drive mounted to a cast aluminum helical gearbox.
Installed with optional flange base cup mounting bracket.
Max. Speed: 354RPM
Electrical Service: 230/460V, 60Hz, 3ph AC
Unit does not include a 7/8"Ø mixing shaft or impeller.

Serial No: 70980-6
Heavy-duty mixer with C-face direct drive mounted to a cast aluminum helical gearbox.
Installed with optional flange/base cup mounting bracket.
Max. Speed: 354RPM
Electrical Service: 230/460V, 60Hz, 3ph AC
Unit does not include a 7/8"Ø mixing shaft or impeller.

Bench top general purpose mixer drive.
1"Ø stainless steel mixer shaft without impeller.
Pneumatic cylinder lift with 15" stroke (no controls).
Base measures 12"W X 25"L x 35"H
2HP drive with variable speed pulley (230/460V, 60Hz, 3ph)
Does not include mixing bowl or accessories.

Output Torque: 12,500 Foot Pounds Force / (Nm) 17,000 Newton Meters
Max. Output Speed: 12RPM
Mixer Shaft: Ø5.75" with installed mechanical seal (shaft has been cut below the mechanical seal flange)
Lifting Mechanism: Twin Hydraulic Cylinders, approx. 7"Ø (bore) X 40"L stroke
Sew Eurodrive gear reducer: X-series, Type X4FA150/HU/F
Powered by a 20HP motor (230/460V, 60Hz, 3ph, 1,760RPM, 256TC frame)
Speed Controllers Sold Separately.
NO CONTROLS FOR HYDRAULIC LIFT OR MIXER DRIVE.

Designed for use with stainless steel 300 gallon capacity IBC Tote Tank (one included)

Lift Assembly: Welded square tube support frame, base mounted, pneumatic cylinder actuated (55" stroke) with positioned limit switches. Requires a base mounting area of 58" X 64", minimum height clearance of 160" & compressed air supply

Liquid Mixer: 7.5HP Admix Rotomax 420 sanitary mixer w/geared drive (washdown capable), 13"Ø twin 3-blade impellers, speed controlled 320RPM max.

300 Gallon Tote Tank: Constructed from 304 stainless steel sheet (10GA) with radiused corners, top stacking bracket/lifting lugs and a 22"Ø center hatch without cover, 49° hopper funnels to a 2 1/2"Ø manually operated ball valve, bi-directional forklift portable, previously used for viscous liquids (additional tanks may be available)

Controls:
Requires 480V, 60Hz, 3ph service (control voltage: 24VDC)
NEMA enclosed controls & instrumentation with drawing set

For sealed tank, vertical mixing applications
Single reduction helical gearing
Rigid shaft flange connection
Supply power: 208-230/460V, 60Hz, 3ph
SHAFT & IMPELLER NOT INCLUDED
Demonstration video on file. Output shaft speed = 890 RPM

GEAR IS APPROXIMATELY 14-3/4"DIA. HAS NO PART NUMBER.
PINION P/N: 45879. UNUSED

GEAR IS APPROX 8-3/4"DIA. X 1-1/4"W., PART NAME: PT# 16 HS GEAR, P/N: 46025-6260. PINION IS APPROX 3-5/8"DIA. X 1-1/2"W., PART NAME: PT# 17 HS PINION, P/N: 46305-9303. SHIPPING INFO: ONE BOX, 14" X 12" X 7".

S/N 6615303. RATIO 24.92:1. Shipping info: One skid, 3,931 lbs, 57x45x39.

DIRECT DRIVE CLAMP MOUNT DESIGN, UNIT SOLD WITHOUT CLAMP, SHAFT, OR IMPELLER. S/N: 89ABB1086. 1725 RPM, 460 VOLT, 3 PHASE, 60HZ.

GEARMOTOR PART NO. 6VG3, ORDER NO. 0004134, P.O. NO. AB49265A. MANUFACTURED BY PHILADELPHIA GEAR CORP., 181 S. GULPH RD., KING OF PRUSSIA, PA 19406. 215-265-3000.