Used and Surplus Valve Baggers

MODEL-C AIR PACKER - The Model C Pneumatic Valve Bag Packaging Machine is designed to package granular and free-flowing products into 20 to 125 pound bags with excellent accuracy and speed. System to include - All necessary controls including a digital weigh controller with LCD display and keypad interface. Load cell mounted bag spout with equal arm flex leaf. 2 ft3 capacity product chamber with 10in inlet butterfly valve. Removable chamber bottom for cleanout. Adjustable height bag ejector to automatically remove the filled bag. Dust shroud on fill spout allows dust collection during fill cycle. -Requires 250 CFM negative air- Integrated 10 HP process air blower including motor starter.
NEMA 12 Carbon steel control enclosure for Dust tight applications. All switches - solenoids - bulkhead - etc. will be NEMA 12 or 4
Carbon steel frame -
10" Stainless Steel contact butterfly valve
Standard butterfly valve is ductile iron - black seat with pneumatic rack and pinion actuator.
Unit require 120 volt single phase 60 Hz power for controls - 230-460 Volt 3 Phase 60 Hz power 30-15 FLA. 90 to 100 PSI of compressed air at 5 SCFM. Compressed air must be clean and dry Operating temperature range of 32F to 110F Unit is 72 inches tall X 25 inches wide X 56 inches deep. Unit shipping weight 750 lbs.
Blower intake filter. Keeps process air clean and reduces noise.
Auto-Zero Tare for base weigh controller. Tares bag and spout before the next fill cycle begins. -Not needed with T3000 upgrade
304 Stainless steel construction on product contact areas
Contact us for availability!

Gross weighing air actuated valve bagger with positive air pneumatic circuit
Air operated pinch tube cutoff, manual bag chair, mild steel construction
12" butterfly valve and actuator, Dust collection connection, 3-way separate exhaust
Filling spout 2" O.D. (ECC A10567), 8" x 12" sight glass in upper chamber
Electronic weighing, with Rice Lake 920i digital controller, 500# “S" load cell
Bulk and dribble cylinder, interfaced to electronic weighing controller
Low pressure air pump assembly - Roots 36 PD Blower w/ 5HP Motor
Complete with inlet filter silencer and discharge silencer, pressure weighted relief valve
197 cfm @ 6 psig maximum air requirements.
Does not include starter

Electronic System w/ load cell weighing. The standard scale has a 22 to 110 pound (10 to 50 kg) range.
Bag Support System includes an air bag clamp and manual bag chair (optional air actuated bag discharge chair for use with a conveyor). Maximum bag length capability is 34 inches (86 cm).
Air Controls are complete and ready for connection to plant air (80 psi or 5.6 kg/sq. cm) and low pressure air source.
Dust Collection Hood is optional equipment. This can be connected to a dust collection system to control air contamination.
Constructed with welded steel and cast components for durable, long life service.

Taylor Products Model A air packer is made for packaging fluidizable powders into valve bags. The self-contained pressure blower package and digital scale control make this the ideal machine for applications requiring a balance of speed and accuracy. Includes 10 HP Spencer regenerative blower.