Used and Surplus Other Screeners

Contact us for more information.

Forsberg Gravity Screener
Model No: 90-V R.H.
Serial No: 16143
29.5 square feet of screen surface area
CFM range: 3,000 - 12,000 CFM
21" Ø Top Inlet
(6) 6" x 6" Side Outlets
Screen Measurements: 57" W x 47" L (Short side) x 100" L (Long side)
Overall Dimensions: 130" L x 75" W x 94" H
Weight = 3,100 lbs.
2 HP drive.
Demonstration video on file.
Forsberg‘s Vacuum Gravity Separators have a reputation of being the most accurate and efficient dust-free separators available! This is possible due to the control of three essential elements:
Air flow
Speed of vibration
Deck differential action
The vacuum gravity air system assures a complete and accurate product density classification from a very lightest to a very heavy product. Forsberg Gravity Separators are constructed of high grade steel which provides years of trouble-free performance. All of Forsberg's Gravity Separators include, a counterbalanced eccentric drive for quiet, vibration-free operation.

Contact us for more information.

Trommel screen is constructed of rolled 11GA stainless sheet with 3/16"W X 3/4"L staggered slots. The inside has a full length of bolted sections of 1/2" thick X 2" polyvinyl bar of helical flighting (9.25" pitch).
Trommel is supported with polyvinyl bearing/bushings and previously powered by a hydraulic rotary drive (not included)
The 56"W X 12'L wash tub is a full-length, v-bottom design with 4" drain fitted with valve, and overflow spillways (tub has one bent leg).
Product inlet pan measures 25"W X 25"L
Overall Dimensions: 183"l x 70" w x 65"h

Trommel screen is constructed of rolled 11GA stainless sheet with 3/16"W X 3/4"L staggered slots. The inside has a full length of 3" stainless steel helical flighting (9.25" pitch). It is supported and rotates by a center shaft with polyvinyl bearing/bushings and previously powered by a hydraulic rotary drive on discharge end (not included)
The 65"W X 114"L wash tub is a full-length, v-bottom design with 4" drain and overflow spillway. Single spraybar installed on outside trommel.
Overall Dimensions: 80" x 148" x 64"

Trommel screen is constructed of rolled 11GA stainless sheet with 3/16"W X 3/4"L staggered slots. The inside has a full length of bolted sections of 1/2" thick X 2" polyvinyl bar of helical flighting (9.25" pitch).
Trommel is supported with polyvinyl bearing/bushings and powered with hydraulic rotary drive
The 55"W X 12'L wash tub is a full-length, v-bottom design with 4" drain fitted with manual gate valve, and overflow spillways.
Contoured product inlet pan measures 25"W X 30"L
Overall Dimensions: 193"l x 70" w x 67"h
Weight = 1,370 lbs.
Demonstration video on file. Power pack ITEM 14727 was used in testing. (sold separately)

Stainless steel construction (bead-blast exterior finish, ground & polished product contact)
Product inlet: 8"Ø sleeve
Product discharge: 8"Ø flanged
Overs discharge: 5.5"Ø sleeve
2HP coupled, direct drive
Power required: 230/460V, 60Hz, 3ph
Demonstration Video on File.
Unit currently has one of two screens installed. The installed screen is approx 16 mesh.

Includes 4,600CFM New York Blower PLR fan (7.5HP)
19.4 sq. ft screen area
Demonstration video on file.

Kice Industries Centrifugal Screener
Model: A48-HD
Serial No: 132754
12" x 12" Inlet
5" Bottom Blow Thru
8" x 8" Side Outlet
4" Top Exhaust
3/4 HP Nord Motor: 3 Phase, 230/460 Volt, 1710 RPM, Frame: 56C
Overall Dimensions: 90" H x 82" L x 25" W
Demonstration video on file.

All Carbon steel construction, model EA-36. Serial 810-63251. Hinged top inspection cover, inlet: 3.5" x 7", bottom outlet: 3" x 22", oversize discharge: 4" x 8". Screen size 3/4" x 3/4". Powered by a 1 hp, 3 ph, 1740 rpm, 230/460 V Syncrogear motor. Chain driven with guard. Test run video on file. Overall dimensions: L 50" x W 35" x H 31"