Used and Surplus Scrubbers

Serial Number LA010710786. Manufactured by Heat Systems – Ultrasonics Inc., 1938 New Highway, Farmingdale, NY 11735. Exhaust fan is Model HSB-50, Serial Number 86-1095. For horizontal cross flow scrubbing of a low flow gas, probably 100 cfm maximum. Constructed of non metallic contact parts: Plastic scrubbing chamber (probably polypropylene), plastic fan (probably cpvc), piping. Small circulating pump in the underneath polypropylene solution tank.

All stainless steel (14GA 304) scrubber vessel with mild steel stand. 49.25"I.D. X 195" overall height. Formed top and bottom cone. Impingement plates with supports. 16"Ø flanged gas stream inlet, 14"Ø flanged clean gas outlet. Installed with internal spray nozzles and wire mesh mist eliminator screen. 2" piping on water basin
Hard copy of design drawing package included

48" I.D. X 12' - 7 7/8" straight side seam. All construction is 316L stainless steel alloy. Design Temperature: 200°F @ 45"W.C. General arrangement and detail drawings on file. No fan included. Shipping dimensions: 80" wide x 21'-2" long x 96" high. Original fan performance rated for 6,600 CFM @ 35" SP (reference J&M item 14057)

250 gallons. Rated for 5 PSIG. 3/8" thick shell and bottom head. Insulated. Designed to be carbon bed demister. Built in october, 2010 volume: 36 cu/ft. Dry weight: 2512 lbs. 30" manway cover. 12" inlet and outlet. Three 2" connections.
Digital drawing on file.

Size 24
Model : Dynascrub - I Serial number: J91144
Capacity: 1600ACFM
All Stainless steel.
Blower requires 230/460 volts, 60Hz, 3 phase power with included speed controller.
Manufactured by Clean Gas Systems, Inc., Farmingdale, NY
Shipping Measurement 5' W X 8' L X 8' H Estimated weight 2500lbs.

This compact, unitized scrubber with self-cleaning wet fan features high dust collection efficiency in minimum space with low water requirements. Rugged construction virtually eliminates maintenance problems.

Ducon Scrubber - Type: UW3, Size: 42, Model: 3, Serial No. C88 735
20 HP Motor, 230/460 Volt, 1765 RPM, TEFC, Frame: 256T
Frame dimensions: 123" L x 53" W x 31" H
Radial blade blower with 15" inlet, 10" spray bar, adapter with spray bar attached is 16" deep
Collector dimensions: 44" dia. X 106" H, 6" bottom drain, 33" dia clean air top outlet,
3" threaded connection, 18" x 18" side cleanout door.
Demonstration video on file.

This unit consists of a No. 1 Venturi Scrubber using recirculated water as a scrubbing fluid. The connected 220 Impinjet Scrubber (two stage) is to act as a mist eliminator and airstream cooler for the Venturi discharge. The Impinjet scrubber housing is 24" diameter with 90" staraight side and 30° cone top & bottom. A general arrangement drawing is available. The gas inlet flange on the venturi is 12" square, the outlet on the Impinjet is 8"Ø. Material of Construction (Scrubber & No. 1 Venturi): 11GA. 304 stainless steel. All internal piping: 304 stainless steel. Carbon steel base footprint is 30" X 56". 148" from floor elevation to top of discharge flange.