Used Granulators & Shredders

Serial Number: 083220140096
Manufacture Date: 2014
For recycling of thermoplastic waste into free-flowing granules for reuse in continuous production of valuable raw materials (must be size reduced to approximately 8-10 mm before it can be fed into the system)
Die Diameter: 12.4" (315mm)
Die Width: 0.79" (20mm)
Product Inlet: 6.5" O.D. sleeve (portable inlet adapter with grate magnet)
Product Outlet: 8"Ø sleeve
System is water cooled
Technical documentation and some controls included
Area of Agglomerator base: 6' X 6'
Supply: 460V, 60Hz, 3ph and cooling water
Overall dimensions: 101" L x 82" W x 65" H.
Weight = 6,800 LBS.

Mild steel construction of the rotor, knives, and shaft
8"Ø single shaft rotor with three- 15" wide beveled edge knives
The throat of the shredding chamber measures 16"W X 14.5"L inside
Stainless steel housing and cover with 4"Ø flanged product inlet and vent filter
Side-removable stainless steel bottom screen with 3/8" perforations (180" sq. in. surface area)
10HP multi-groove v-belt reduction drive (will need belt guard)
Supply Power: 208-230/460V, 60Hz, 3phase
Overall dimensions: 36" D x 59" W x 54" H.
Weight = 1,416 LBS.

Mild steel construction on a portable frame
Swing-away panels give full access to internals
Product enters a 5" X 10" inlet hopper falling into a 4.75" square cutting chamber
Three blade segmented, helical rotor
1/3 cubic foot discharge box
1HP TEFC V-belt drive
220V, 60Hz, 3ph
Granulator housing is 18"W X 34"L

Demonstration video on file. Weight = 922 lbs.

Single rotor size:39.37"Ø X 62"W. Model MB 283. (250 HP bi-directional hydraulic power pack drive required, Hagglunds Marathon radial piston,). Previously used to grind PE film bales.

With belt feeder and screw take away. Demonstration video available. 10"×19" opening

S/N-12486A. Power rating is 460 volt, 60 hz, 3 phase. Process control corporation fan I.D. Tag is model FNN5N3C11, S/N-24134A, date 10/14/86 and 460 volt, 3 phase, 60 hz power rating. Unit is a combination shredder/fan, and once product is shredded, blower fan conveys shredded material awayn Fan motor is 5 hp, 3485 rpm, 184tc frame. Shredder motor is 1 hp, 1725 rpm, 208-230/460 volt, 3.6-3.4/1.7 amps, 1.15 service factor, 143t frame. Inlet to shredder is about 2" high by about 5" wide. Two knife blades on rotor and one fixed blade. Belt driven, rotor speed: 2120 RPM.

7.5 HP GE motor, 1750 rpm, 230/460 volt, 213t frame.