Used and Surplus Carbon Steel Tanks

Overall dimensions: 40x38x78. Weight = 503 lbs.
Straight side = 50"
Diameter = 24"

300 GALLON TANK CAPACITY. MANUFACTURED BY DRY COOLERS, INC. MODEL CSX-200-300. S/N J-3170. 4' DIAMETER X 70" HIGH INSULATED CARBON STEEL TANK. SKID MOUNTED.

All carbon steel, continuous fillet weld construction, two-sided forktruck brackets, liquid level switch, and pressure vent. Top-mounted chemineer mixer with winsmith 920 speed reducer is flange connected to a standard 22"ø drum lid. Mixer RPM = 180. 4"npt male inlet connection, 1"npt injection port. Mixer is powered by a 3/4hp, 1725rpm, 115/230v, 60hz, single phase reliance duty master motor. Tank dimensions: 41" W. X 46"d. X 58"h., overall height: 6'-8". Weight = 891 lbs. Test run video is on file.

ALL CARBON STEEL, CONTINUOUS FILLET WELD CONSTRUCTION, TWO-SIDED FORKTRUCK BRACKETS, LIQUID LEVEL SWITCH, AND PRESSURE VENT. TOP-MOUNTED CHEMINEER MIXER WITH WINSMITH 920 SPEED REDUCER IS FLANGE CONNECTED TO A STANDARD 22"Ø DRUM LID. MIXER RPM = 180. 4"NPT MALE INLET CONNECTION, 1"NPT INJECTION PORT. MIXER IS POWERED BY A 3/4HP, 1725RPM, 115/230V, 60HZ, SINGLE PHASE RELIANCE DUTY MASTER MOTOR. TANK DIMENSIONS: 41"W. X 46"D. X 58"H., OVERALL HEIGHT: 6'-8". Weight = 891 lbs. Demonstration video available.

CARBON STEEL CONSTRUCTION. 45"Ø X 8' STRAIGHT SIDE. 8"Ø FLANGED INLET AND OUTLET. 18"Ø BOLTED ACCESS DOOR.

Influent enters thru a 4"Ø flange connection into a 90 gallon rapid mixing tank, then on to a larger tank to begin the slow (paddle) mixing stage to develop the floc. Liquid exits the tank thru a 6" flanged outlet. Mild steel construction with continuous fillet weld construction. Internal baffles. NEMA 3R outdoor enclosure. Control enclosure. Tank dimensions: 58.5" square X 90" high.
Design parameters:
Detention time: 10 minutes
712 sq. in. paddle area

5' diameter x 8' straight side. Open top. 60" diameter cone with 2" diameter flanged outlet. Four I-beam legs. Overall height = 17'-7". This is a presettler tank to a filter press we previously owned.

Continuous fillet welded construction. 8'Ø with 8'-2" straight side, flat top, cone bottom. Overall height: 14'-0". Top cover ports: two- 4"Ø flanged, four- 2"npt female, one- 18"Ø flanged inspection. Mixer Shaft: 92" Overall dimensions: 109" x 109" x 173" high. Weight = 4,080 LBS

384 Cubic Foot Square Tank
8' x 8' x 6' H
(2) 4" Inlet Connections
(2) 3" Outlet Connections
Tank is partitioned in the middle, but the bottom 6" of the tank is open all the way across

TANK WAS INSTALLED BUT IS UNUSED. ORIGINALLY DESIGNED TO BE A CHLOROFORM SURGE TANK. BUILT FOR LETHAL SERVICE. BUILT BY GASPAR, INC. CANTON, OHIO IN 2010. DESIGNED FOR 109 PSIG AT 400°F. ESTIMATED EMPTY WEIGHT IS 11,500 POUNDS. GASPAR DRAWING 37444. COMPLETE DRAWINGS AND SPECIFICATIONS ARE ON ELECTRONIC FILE.
TANK IS 1/2" THICK AND 78" I.D. X 165" TANGENT TO TANGENT. TANK IS FULLY INSULATED FOR OUTDOOR INSTALATION. TANK HAS BEEN PREVIOUSLY INSTALLED BUT NEVER USED.

78" ID X 17'-10" OAHT. TANK WAS INSTALLED BUT IS UNUSED. ORIGINALLY DESIGNED TO BE A CHLOROFORM SURGE TANK. BUILT FOR LETHAL SERVICE. BUILT BY GASPAR, INC. CANTON, OHIO IN 2010. DESIGNED FOR 109 PSIG AT 400°F. ESTIMATED EMPTY WEIGHT IS 11,500 POUNDS. GASPAR DRAWING 37444. COMPLETE DRAWINGS AND SPECIFICATIONS ARE ON ELECTRONIC FILE.
TANK IS 1/2" THICK AND 78" I.D. X 165" TANGENT TO TANGENT. TANK IS FULLY INSULATED FOR OUTDOOR INSTALATION. TANK HAS BEEN PREVIOUSLY INSTALLED BUT NEVER USED.

All carbon steel construction. Dimensions: 16'-8"W X 44'-1"L X 3'-6"D. The containment basin is currently cut into (4) sections to accommodate shipping. *Assembly required - sections will need to be welded back together prior to use. *Tanks shown have been sold.

Serial No:67236, Manufactured: 2013
Rated for 150 PSI @ 500°F.
Flanged connections measure 4-1/2" I.D.

Serial No: 67237, Maufactured: 2013
Rated for 150 PSI @ 500°F.
Flanged connections measure 4-1/2" I.D.