Used and Surplus Stainless Steel Tanks

18"Ø with 16" straight wall to weld seam on bottom F&D head.

All continuous fillet welded construction. Tank shell is 18"Ø with a 25.5" side wall length. Dished head top, cone bottom with 2" ANSI 150 flanged drain. Installed 0.30HP Lightnin flange-mount continuous mixer and a Rosemount pressure transmitter. Stationary designed stand made of carbon steel legs. Fiitted with two- 1 1/2"Ø and a single 2"Ø flanged top port. Inspection port with cap. 15PSIG max. working pressure, 100°F max. temperature. Requires 115/230 volt, 60 Hz, single phase AC connection. Overall height: 86".

Demonstration video on file. Overall dimensions: 38x29x74. Weight = 473 lbs.

Insulated tank is constructed from 14GA. stainless steel sheet. The internal shell are formed and continuous fillet welded water-tight. The outer cladding is a formed and bolted assembly with bottom sheet on legs. Tank dimensions (outside): 10.5" X 26" X 24"h
Installed 32GPM max, 230°F max. grundfos recirculating pump, thermocouple, and carbon steel piping and valves.

26" diameter with 10" straight side and jacketed, hemispherical bottom bowl
Rolled top edge & three-leg braced stand
1.5" X 2" flanged reducer
40PSI rating on the jacket (3/4"NPT)
42.5" total height

Northland stainless inc. Nb #1219, S/N 915509-1, shell mawp fv/50 psig @ 300 deg. F, min. Dmt -20 deg. F @ fv/50 psig, jacket mawp 150 psig @ 300 deg. F mawt, min. Dmt -20 deg. F @ 150 psig, shell thickness .187 in., head thickness .187 in., jacket thickness .060 in., head thickness .060 in.

Dimensions - tank: 30"DIA.x 17" H. Top connections: (2) 3"DIA.and (2) 2" ø. Side connections: (2) 1" ø. Bottom outlet: 2" ø. Overall: 42.5" H x 48" w.

18"ø x 38" straight side with side sight glass and dished head bottom. Dimple jacket on lower half of tank (18 gallons). Jacket rated for 90PSIG @ 300°F. Portable on 6" casters. 1"ø centered drain with tri-clamp connection. Internal baffle bar. Hinged flat cover. Top and bottom thermowell porting. 64" overall height.

All stainless steel construction. Tank dimensions: 20"Ø, 33" straight side wall. 77" total height. Max. pressure: 150PSI @ 200°F. Installed with three 1" ANSI 150 flanged inlet ports and a single bottom drain.

24"Ø X 36" STRAIGHT SIDE LENGTH, HALF-MOON HINGED LID, CONE BOTTOM WITH 2"Ø SANITARY OUTLET. OVERALL HEIGHT OF TANK IS 51". INCLUDED VERTICAL TOP-MOUNTED MODEL X1Q25 LIGHTNIN AGITATOR.

23.25" inside diameter
36" straight side.
2" flanged center drain.
Overall height = 78-1/2"
With Endress Hauser level probes.

WITH 1/4HP LIGHTNIN MIXER.

24"Ø housing (316 stainless steel construction) with dished head bottom and removable top cover. 2"Ø bottom drain. 6"Ø ANSI flange (gusseted) for mixer mount. Side mounted saddle brackets. Unit installed with:
■ Internal stainless steel immersion coil
■ Removable cover
■ 2/3 outer jacket made of carbon steel
■ Stainless mixer shaft with twin 3-bladed impellers (without mixer drive)

Shipping Info: Skid 39" X 82" X 40" 1805LBS

316 stainless steel construction (10GA. thickness)
24" inside diameter
Top and bottom dished heads
Top head ports (gasketed sanitary): 6"Ø, 1 1/2"Ø, 3/4"Ø
Bottom drain is a single outlet diaphragm valve
Hinged & gasketed lid with open top access
4- leg support with locking casters
Overall height: 75"

316 stainless steel construction (10GA. thickness)
24" inside diameter
Top and bottom dished heads
Top head ports (gasketed sanitary): 6"Ø, 1 1/2"Ø, 3/4"Ø
Bottom drain is a single outlet diaphragm valve
Hinged & gasketed lid with open top access
4- leg support with locking casters
Overall height: 75"

30" DIAMETER X 30" STRAIGHT SIDE STAINLESS STEEL OPEN TOP TANK. INCLUDES UNDERFLOW BAFFLE. NOZZLES: 2" SIDE NOZZLE AND ONE 1.5" AND ONE 1".

32"ø x 32" straight side. Overall height = 64". 5"ø inlet. 2-1/2"ø outlet. Dished bottom and top.

12GA stainless steel construction with corregated stiffener band
38"Ø with a 20" straight side & sloped bottom
3" flanged sanitary drain (10" from floor)
40" height

Tank design is a 37.5" I.D. with 25" straight side
Side & dished head bottom steam jacketing, full top covering w/ hinged inspection
2.25"Ø bottom center drain installed with sanitary ball valve
Installed with clean-in-place piping and hardware
Pedestal-mount 1HP reduction-geared mixer drive (132RPM impeller speed full)
Power requirements: 208-230/460V, 60Hz, 3Ph
Demonstration Video on File.

Holds 130 gallon capacity (flooded), or 500 liters
Non-pressurized, 316L stainless steel certified tank for ambient temperature liquid
12GA. Shell with a 37" straight wall
30"Ø cylinder with 10GA. Welded dish bottom with a single outlet diaphragm valve
Manual davit lift assist for domed cover with 10" and 1.5" flanged sanitary ports
Portable with locking casters (two fixed, two are swivel)
Overall height: 76"
~3" bottom center drain.

Skid-mounted tandem Neptune series 500- 1/3HP, 5.5GPH @ 350PSI pumps for chemical liquid metering. Pumps have 316 stainless steel heads and TFE diaphragms. Fully welded 140 gallon stainless steel liquid tank with flat top and bottom. Includes a Neptune E series bung-entering mixer with stainless steel impeller.

36"Ø X 36" tall continuous welded construction with top edge reinforcement band. Half moon hinged cover with slot for mixer/agitator. Flat bottom with 1/2" drain. 26" tall carbon steel angle support stand. Sight glass liquid level gauge.

36"Ø X 36" tall continuous welded construction with top edge reinforcement band. Half moon hinged cover with slot for mixer/agitator. Flat bottom with 1/2" drain. 26" tall carbon steel angle support stand. Sight glass liquid level gauge.

36"Ø X 36" tall continuous welded construction with top edge reinforcement band. Half moon hinged cover. Flat bottom with 1/2" drain. 26" tall carbon steel angle support stand. Sight glass liquid level gauge. Direct drive clamp-on mixer: 1/3HP, 1725RPM, 60Hz, 3 phase. Demonstration video on file.

150 Gallon, Model N 150, 316 Stainless Steel. Approximate 43" diameter x 33" deep. Flat top with (2) 1/3 hinged covers, jacketed hemispherical bottom rated for 125PSI. Mixer bridge with top entering anchor style scraper, driven by a 1 1/2hp gearmotor. Additional 1 1/2HP vertical agitator. 2"Ø center bottom outlet. Mounted on three- 2500LB load cells supported by a structural stainless steel base frame.
Supply power for drives: 208-230/460V, 60Hz, 3ph

Jacket was hydro-tested and it does have a small seeping leak around the main outlet. Main chamber is intact with no leaks