Industrial gearbox. Serial Number: VA0461124 -
Configuration: Right angle-vertical, solid shaft with flange
Gearbox Size & Type: 8075 Spiral Bevel with quadruple gear reduction.
Housing is cast iron with base mount motor adapter.
Rated for 20HP @ 1750 (34HP @ 1750RPM max.)
Gear Ratio: 280.79:1
Base mounting area: 23.5"W X 42.75"L
MOTOR/DRIVE NOT INCLUDED
Shipping info: One skid, 88x55x32"
Weight = 2,840 LBS

S/N: GM03A306-2; Date of Manufacture: 2020
The 3700 LX is a centerline-mounted, end-suction centrifugal process pump, meets API 610 specification.
Cast iron, dual volute overhung casing, radially split design.
Flow Rate: 250GPM
Head: 952'
Impeller: Ø14.38" (max.: Ø16.22")
Max. Design Working Pressure: 727PSIG @ 120°F
Max. Temperature: 800°F
Inlet: 4"Ø ANSI 300 RF flange
Outlet: 1.5"Ø ANSI 300 RF flange
Heavy-duty base skid assembly with sump (18"W X 58"L).
125HP severe duty drive with barrier fluid cooling for the mechanical seal.
Supply Power: 460V, 60Hz, 3ph, 3,580RPM
Overall dimensions: 105x63x94"
Weight = 5,610 LBS

300 HP, 3580 RPM, 460 Volt, 3 Phase
Shipping info: One skid, 75x48x35"
Weight = 3,610 LBS.

500 HP, 1190 RPM, 460 Volt, 3 Phase
Shipping info: One skid, 75x60x41"
Weight = 5,760 LBS.

Contact us for availability and lead time.

Model SA-1200 2SC
Serial # I.G.S 06-22-7204
This two deck round vibratory separator is new with warranty. The 48" size will typically process approximately 2 cubic feet per minute of material. This unit has carbon steel base / drive with stainless contact parts including cover. 304 Stainless steel glass-bead finish material contact parts.
Inlet: 8" diameter
Outlets (3): 8" diameter
Drive: 1.5 HP, 460 Volt, 3 phase, 60 Hz, 1750 RPM
Estimated shipping: One crate, 57x57x64, 1291 lbs

Model SA-750-2SC
Serial No. I.G.S. 06-22-7280
This two deck round vibratory separator is new with warranty. The 30" size will typically process approximately 0.75 cubic feet per minute of material. This unit has powder coated carbon steel base / drive with stainless contact parts
Inlet: 6" diameter
Outlets (3): 6" diameter
Drive: 480v / 3 phase / 1HP
Estimated shipping: 36x38x48, 425lbs
304 Stainless steel glass-bead finish material contact parts.
Demonstration Video on File.

PART# 473924
Serial # 107272
All stainless steel construction, glass bead surface finish
For dry, free-flowing materials in 12"Ø pipeline, horizontal or vertical install
Line Size: 12"Ø ANSI 150 flange
Line Length: 35.5"
Cone magnet swings out of product flow for manual cleaning
Weight = 358 lbs.

Serial # U0566-03 91000-27
All stainless steel material contact surfaces
3.5"Ø double concentric auger metering mechanism with downspout
Installed dust-tight supply hopper with 11"Ø sleeve connection and vent port
Overhead counter-balance springs, weigh resolver assembly, and dashpot
Enclosed resolver computational module
1HP auger/agitator gearmotor (inverter duty)
Frame is welded 3" square tube with bracing and a base footprint of 43"W X 54"L

Combination Bunting magnetic and electronic metal separating system with pneumatic (vacuum) conveying discharge consisting of:
• Neodymium powered "FF series" rare earth drawer magnet w/no-spill slide gate - houses 2 rows of 1"Ø temperature compensated rare earth magnet bars
• 3"Ø Quicktron metal separator (IP54 rated)
Detection: triple coil
Electronics: AMD 03 with adjustable sensitivity
Outlet: 3.15" O.D. sleeve
Max. Operating Temperature: 154°F
Max. Product temperature: 176°F
Reject: air operated with stainless steel flap
• Portable frame assembly with surge bin and Ø2.5" take-off port
Supply: 110/240V, 50/60Hz, 1 phase and min. 70PSI compressed air
Dimensions: 28" X 28" X 82"
Demonstration Video on File.

Combination Bunting magnetic and electronic metal separating system with pneumatic (vacuum) conveying discharge consisting of:
• Neodymium powered "FF series" rare earth drawer magnet w/no-spill slide gate - houses 2 rows of 1"Ø temperature compensated rare earth magnet bars
• 3"Ø Quicktron metal separator (IP54 rated)
Detection: triple coil
Electronics: AMD 03 with adjustable sensitivity
Inlet: Ø1.77"
Reject Outlet: 3.15" O.D. sleeve
Max. Operating Temperature: 154°F
Max. Product temperature: 176°F
Reject: air operated with stainless steel flap
• Portable frame assembly with surge bin and Ø2.5" take-off port
Supply: 110/240V, 50/60Hz, 1 phase and min. 70PSI compressed air
Dimensions: 28" X 28" X 82"

Andritz Feed and Biofuel Screw Mixer, Model-DA30-21 Series 2 S/N- 132090174-2012
304 Stainless Steel material contact parts. 6 Additive Ports, Gear Box Assembly With FAZ 107 AD
30HP, 460 volt, 1765RPM, 3 phase, 60Hz with belt/gear drive.
Agitator speed = 150 RPM.
Dimensions: 3'-4" W x 4'-8" H x 28'-8" L
Shipping Weight: 12,500 lbs
Drawings on file
Applications: Corn Wet Milling, Bio Ethanol, Waste and By-Products and other
This versatile Double Agitator Mixer (or DA Mixer, also known as a pug mill) continuously mixes all types of products including dry materials, free-flowing powders, thin slurries, and thick pastes. The compact design of this DA Mixer allows installation in low-headroom areas. Mixing intensity, retention time, and product appearance can be controlled simply by changing the agitator speed or paddle settings
The DA Mixer is designed for both standard or corrosive/abrasive applications. It is supplied in a stainless steel construction and with bearings which are isolated from the product zone. Both of these features are designed to help preserve the integrity of your process blend/formulation as well as to extend the life of your machine. Typical uses for the DA Mixer are adding molasses or fat to animal feeds and water to meals and filter dusts; sewage sludge and lime/wood chips; corn gluten and steepwater; filter cake and dried, recycled fiber; explosive slurries; and human foods. Many DA Mixers, in non-abrasive applications, have been in operation for more than 30 years.

FOR SEVERE DUTY, ABRASIVE SLURRY APPLICATIONS. DUCTILE IRON ASTM A536 BODY; 2205 ALLOY STAINLESS STEEL GATE; FIELD REPLACEABLE URETHANE LINER; STEEL REINFORCED RUBBER COATED FLANGE SEALS; 14" DOUBLE ACTING PNEUMATIC CYLINDER WITH DUAL COIL SOLENOID VALVE, PROXIMITY SWITCHES, AND LOCKING BALL VALVE. ALL PRE-WIRED TO FIBERGLASS TERMINAL ENCLOSURE. ACTUATOR FAIL POSITION: FAIL IN PLACE LOS/FAIL IN PLACE LOA. Shipping info = 56x40x32. Weight = 1156 lbs.