Stainless steel support frame and stand with a 60 cu/ft loading hopper (73" load ht.)
Manufactured by American Food Equipment Company.
S/N 090203
Plastic flat top style belt with 3" cleats spaced at 24" on a 30° incline (approx. 7' discharge ht.). We do recommend replacing belt in the new future.
Drive mounts on the discharge end (motor not included, bare shaft)
Heavy-duty nylon or similar conveyor bed glide bars
Belt drip pan
Welded square tubing frame is 60" wide X 141" long

Contructed of 304 stainless steel.
130 Liter capacity.
Tub size: 18"W x 36"L x 20"D
Max working capacity: 5 cubic feet
5.5" Ø outlet
2HP U.S. Syncrogear motor, 3 phase, 220/440 volt, Frame: 184-11
Demonstration video on file.
Overall dimensions: 75" long x 45" wide x 61" high.
Weight = 590 lbs.

Suction: 3"Ø sleeve (filter housing)
Exhaust: 3" with absorptive silencer
Blower unit is an eight-stage with shrouded cast aluminum impellers.
Rated Flow: 200CFM @ 6.0 In. HG (curve on file)
Integrated 32"Ø pulse-jet filter housing holds nine, 5.5"Ø X 5.5'L cages.
Filter bags and pulse timer are not included.
10HP coupled drive (230/460V, 60Hz, 3ph)
Welded steel base frame measures 38"W X 70"L

ID # 2013-V-02-04
Gravity flow diversion for dry bulk materials.
8" square flange connections.
Straight Length: 20.87"
Divert Angle: 45 degrees
Pneumatic actuator with solenoid valve and position indicator.

Serial # 001082
Aluminum alloy construction, mountable in any position, for continuous service.
Line Connections: 2 ½"NPTF
Max. Air Flow: 353 CFM @ 60Hz
Rated Pressure: 256 In. H²O
Rated Vacuum: 170 In. H²O
17HP direct connected drive (220-275V/380-460V @60Hz, 3360RPM max.)
Unit can run on 50Hz.

Max. Operating Speed: 3550RPM
Inlet Connection: 12"Ø ANSI 125# bolt pattern (threaded)
Outlet Connection: 10"Ø ANSI 125# bolt pattern (threaded)
Outlet installed with vibration isolator and wafer style check valve.
Number of Stages: 8
Impeller Diameter: 24.5" (380FPS tip speed)
Max. Casing Pressure: 25PSIG
200HP coupled drive (460V, 60Hz, 3ph, 221Amps)
Welded structural steel base frame measures 34.5"W X 120"L

Operating Speed: 3550RPM max.
Inlet Connection: 12"Ø ANSI 125# bolt pattern (threaded)
Outlet Connection: 10"Ø ANSI 125# bolt pattern (threaded)
Outlet installed with vibration isolator and wafer style check valve.
Number of Stages: 8
Impellers: Cast Aluminum
200HP coupled drive (460V, 60Hz, 3ph, 221Amps)
Welded structural steel base frame measures 34.5"W X 120"L
Motor freely hand rotates.
The blower will not currently rotate by hand.

Serial No: 351985
Fabricated heavy gauge steel housing.
Inlet: 8" ANSI 125/150# class flange
Outlet: 8"Ø ANSI 125/150# class flange (0.35ft.² outlet area)
Wheel: Fabricated aluminum alloy
15HP direct drive (230/460V, 60Hz, 3ph, 3530RPM)
Pedestal base mounting frame (18" X 19").
Performance data on file.

For sewage, wastewater and effluent applications (2.5"Ø max. solids discharge).
Heavy duty cast iron, volute type casing with a 3"Ø 125# ANSI flanged horizontal discharge.
Impeller: Ø7.25" two vane, semi-open, non-clog
Max. Pressure: 30PSI
Max. Flow: 400GPM
Max. Head: 53ft
Electrical Service: 460V, 60Hz, 3ph

Heavy duty cast iron, volute type casing with a 4"Ø 125# ANSI flanged horizontal discharge.
For sewage, wastewater and effluent applications (3"Ø max. solids discharge).
Impeller: Ø7.5" two vane, semi-open, non-clog
Max. Pressure: 30PSI
Max. Flow: 550GPM
Max. Head: 50ft
Electrical Service: 460V, 60Hz, 3ph

Feeder Type: MODHC-1G-2A
Coni-Flex® type hopper and a 30 cu/ft hopper extension with clamp-on cover.
1HP drive for the flex hopper/massager.
Weigh system with three-point 10kN load cells and a signal trim enclosure.
2HP helical auger drive, max. speed of 144RPM
Service Connection: 220VAC, 60Hz, 3ph.
Feeder & weight scale controls not included.
Box tubing support frame, bolted to a 48" square plate.

Feeder Type: MODMS-1G-2A
Coni-Steel® type hopper with a 24" extension and cover, 15 cu/ft nominal capacity.
3/4HP vertical agitator (13RPM)
Weigh system with two-point 300KG load cells and a signal trim enclosure.
1/2HP auger drive (193RPM output speed)
Service Connection: 220VAC, 60Hz, 3ph.
Unit is missing the 3"Ø helical auger and drive mounting adapter.
Feeder & weight controls not included.

Feeder Type: MODMS-1G-2A
Coni-Steel® type hopper with a 5 cu/ft capacity, clamp-on cover.
3/4HP vertical agitator, split design for easy removal (10RPM).
Weigh system with two-point 300KG load cells and a summing box.
1/2HP auger drive with easy cleanout design (188RPM auger speed).
Service Connection: 220VAC, 60Hz, 3ph.
Feeder & weight scale controls not included.

Feeder Type: MODMS-1G-2A
Coni-Steel® type hopper with a 24" extension and cover, 15 cu/ft nominal capacity.
3/4HP vertical agitator, split design for easy removal (10RPM).
Weigh system with two-point 300KG load cells and a signal trim enclosure.
1/2HP auger drive with easy cleanout design (192RPM auger speed).
Service Connection: 220VAC, 60Hz, 3ph.
Feeder & weight scale controls not included.

Feeder Type: MODHC-1G-2A
Coni-Flex® type hopper and a 30 cu/ft hopper extension with clamp-on cover.
1HP drive for the flex hopper/massager.
Weigh system with three-point 10kN load cells and a signal trim enclosure.
2HP helical auger drive, max. speed of 144RPM
Service Connection: 220VAC, 60Hz, 3ph.
Controls for the feeder & weight scale not included.
Box tubing support frame with a base area of 41" X 36".

Two-stage, belt-driven reciprocating compressor with a 100% duty cycle.
Mounted to a 120 gallon capacity horizontal tank.
Rated for 36 CFM @ 145–175 PSI working pressure.
Air connection: 1"NPT
10HP V-belt drive with motor starter (230/460V, 60Hz, 3ph)
One skid, 70x36x60" H
Weight = 857 LBS.

Stainless steel U-trough with cover, four sections with hanger bearings at each spice.
Auger: 14"Ø, 12' long flighting is half-pitch at drive end, standard pitch on remaining
Trough Length: 48'-0"
Flanged Discharge: 15" square
7.5HP belt drive with shaft-mount reducer (230/460V, 60Hz, 3ph.)
Working speed of the auger is 43RPM.

Houses a quantity of 4, Ultra-Web® pleated cartridge filters with a total surface area of 760 sq/ft.
(Donaldson P/N: 190817 Ultra-Web cartridge filters)
Housing is rated for +15 / -20 inches of water gauge.
7.5HP top-mounted centrifugal fan (3,450RPM) provides a nominal airflow range of 500-3,150CFM.
60° hopper base with 7"Ø solids discharge sleeve and an 18"Ø drum cover.
Air Inlet: 8"Ø sleeve
Clean Air Outlet: 10" X 15" flange
Space-saving design with a base footprint of 41" X 55.5".
Overall Height: 142"
Requires 208-230/460V, 60Hz, 3ph AC & compressed air supply.

460V
224 Amps
Programable control pad with digital display.
Cabinet Dimensions: 23"W X 36.5"H X 13"D
IMPULSE Variable Frequency Drives are designed to serve as the intelligent foundation for overhead cranes and hoist systems.

Capacity: 690SCFM @ 2.8PSI
Blower unit configured for pressure with vertical air flow through the blower.
Integrated inlet filter, pressure relief valve, and acoustic enclosure.
Discharge Port: Ø5.75" sleeve with reducing coupling
20HP severe duty, direct drive (460V, 3537RPM)
Acoustic enclosure with filter monitoring, measures 43.5"W X 82.75"L X 47"H

w/ Inlet Filter Acoustic Enclosure
Capacity: 3,450 CFM @ 2.2 PSI
Air Inlet/Outlet: Ø12.75" sleeves
75HP direct drive motor, (230/460V, 60Hz, 3ph, 3545RPM)
Included Accessories:
300 sq/ft media area filter unit with high-efficiency V-style cartridge filters, floor mounted.
Acoustic enclosure with removeble panels (64.5"W X 102.5"L X 60"H)
Blower Weight: 1,821 LBS

Capacity: 900 CFM @ 1.7 PSI
Air Inlet: Ø12.75" sleeve
Air Outlet: Ø8.62" sleeve
25HP direct drive motor, (230/460V, 60Hz, 3ph)
Included accessories:
Acoustic enclosure with removable panels (62"W X 95"L X 55"H)
200 Sq/Ft media area inlet filter unit with high-efficiency V-style Camfil filter

Capacity: 900 CFM @ 1.7 PSI
Air Inlet: Ø12.75" sleeve
Air Outlet: Ø8.62" sleeve
25HP direct drive motor, (230/460V, 60Hz, 3ph)
Included accessories:
Acoustic enclosure with removable panels (62"W X 95"L X 55"H)
200 Sq/Ft media area inlet air filter unit with high-efficiency V-style Camfil filter

Capacity: 690SCFM @ 2.8PSI
Blower unit configured for pressure with vertical air flow through the blower.
Integrated inlet filter, pressure relief valve, and acoustic enclosure.
Discharge Port: Ø5.75" sleeve with reducing coupling
20HP severe duty, direct drive (460V, 3537RPM)
Acoustic enclosure with filter monitoring, measures 43.5"W X 82.75"L X 47"H