Constructed as a two-section, braced frame with 6" square structural tube legs with base plates and stands 18'-0" in total height assembled. The 2-ton rated hoisting beam included a motorized trolly (no hoist) and a bag hanger frame. The bag support dish with neoprene skirt is installed with four pneumatically controlled agitators and spout pinch clamp for product outflow. The stainless steel surge hopper has bulk bag spout access plenum with hinged, see-thru panel, 2"FNPT side port for level limit switch, and pnematic vibrator. Discharge height at hopper outlet flange is 28.25". The footprint of the legs is 72" square. All cross bracing is continuous fillet welded. The two frames and hoist beam bolt together. Will require dry, compressed air for the pneumatics and 230/460 volt, 60Hz, 3 phase AC power for the trolley.