Denver Holoflite S/n-196234-002e. 316L stainless steel material contact parts. 1227 square feet of heat transfer area. Screws: four screws each 24 inch diameter x 24 feet long , 6 inch pitch. Asme design and code stamped for 175 psig at 650°f. Trough: the drive end discharge is 12" long x 65" wide. Trough is jacketed and code stamped for 175 psig at 650°f. Interior welds ground smooth. Insulation spikes for 3" insulation on trough. Internals of trough and vapor dome designed for 3 psig and 30" w.C. Vacuum. Vapor dome: with vapor outlet of 42" i.D x 46" o.D x 1/2" thick. 48 holes 1/2" on collector designed to support 1500 lbs and two inspection ports. Constructed of 316l stainless steel. Stiffening bars on outside of vapor dome. Several nozzles for temperature, steam snuffing, etc.
Drive: sumitomo gearmotor, m3265/19-b, 493:1 ratio, 228,000 in-lb output rating; motor is 30hp, 1785 rpm, tefc, 460v, 3 ph, 60 hz nema design b with winding thermostat add for chemical duty. Coupling is 1150 t 10 falk steel flex. Speed indicator and soleplate for under gearmotor only.
Manual and drawings on file.
Overall dimensions: 86" wide x 37'-5" long (including drive) x 78" high